Steam Generators For Oil Production Operations


  • Name:

  • Email:

  • Ton:

  • Phone:

  • Pressure:


  • Please tell us the type of boiler you need

  • Please tell us the boiler fuel you will use


We will process the information you submit quickly and ensure that your information is completely confidential.

Cyclic Steam Injection - an overview | ScienceDirect

James G. Speight PhD, DSc, in Introduction to Enhanced Recovery Methods for Heavy Oil and Tar Sands (Second Edition), 2016. Cyclic Steam Injection. Cyclic steam injection is the alternating injection of steam and production of oil with condensed steam from the same well or wells. Thus, steam generated at surface is injected in a well and the same well is subsequently put back on

Get a Quote

Direct Contact Steam Generator (DCSG) for Enhanced

The DCSG has been developed as an alternative to once through steam generators (OTSGs) for steam assisted gravity drainage (SAGD) for heavy oil and bitumen production. It uses produced water as the feed and removes the impurities by filtration from the produced steam. The DCSG has been tested with 13,000ppm total dissolved solids in the feedwater.

Get a Quote

Enhancements to an Online Steam Analyser for

2019-10-10 · The actual "heat" or energy that is desired for production resides in the vapor portion and therefore, the maximum steam quality is desired to most efficiently produce heavy oil. In heavy oil operations, the maximum steam quality allowed is 80% for Once Through Steam Generators (OTSGs) – the most common technology used in the oil sands.

Get a Quote

Could subsurface steam generation revolutionize the

2016-8-11 · What looks set to be the first successful downhole steam generation system for thermal heavy oil production is now operating as a commercial demonstration project at Buzzard, Sask. Unlike conventional thermal recovery systems that inject steam generated at the surface, a

Get a Quote

Pilot Plant Cleans, Repurposes Water from Oil

2019-9-29 · Black & Veatch designed and built a 6,000-bpd pilot plant that treated the produced water from oil recovery operations for reuse in the steam generators. in mind when it searched for ways to clean and repurpose water produced as a byproduct of one of its enhanced oil recovery operations. The Koch fertilizer production plant in Enid

Get a Quote

Kern River steam expansion (Journal Article) | OSTI.GOV

2019-10-14 · It is being used to furnish steam for 60 wells in a displacement project. The components that have made Getty Oil Co. the leading steamer at Kern River and the field, in turn, the world capital for oil-field steam operations include shallow wells, steam generators, and--since last year--a computer.

Get a Quote

The energy efficiency of oil sands extraction: Energy

Oil sands operations have become significantly more energy efficient over the history of the industry. • Oil sands production is largely fueled with energy from the bitumen resource itself, making external energy returns high. • Oil sands production is still significantly less efficient than conventional oil production.

Get a Quote

Plant Operations - Facilities Management -

Plant Operations Boiler Chief: Andrew Mudd 303-273-3047. The Heating Plant is responsible for round the clock steam production and distribution throughout campus. Heating Plant. Operation and maintenance of 2 50,000 lbs./hour Victory Energy water tube boilers. Operation and maintenance of 1 70,000 lbs./hour Nebraska water tube boiler.

Get a Quote

Steam generator - encyclopedia article - Citizendium

2015-8-18 · Heat recovery steam generators. A heat recovery steam generator (HRSG) is a heat exchanger or series of heat exchangers that recovers heat from a hot gas stream and uses that heat to produce steam for driving steam turbines or as process steam in industrial facilities or as steam

Get a Quote

Control system optimizes EOR steam generator

2003-9-2 · PetroChina improved production safety, realized greater oil production, and saved energy after implementing model-free adaptive control on its steam generators. Click on the pdf link below to view

Get a Quote

Solar EOR, Oil and Gas, Solar Thermal, Solar Steam

California oil production needs steam . Thermal enhanced oil recovery (EOR) has extended the value and life of California oilfields for the past five decades. Today, nearly half of all California's crude oil production relies on steam injection, using imported natural gas as the fuel.

Get a Quote

Soft Sensors | Canada's Oil Sands Innovation Alliance -

2019-10-8 · At most in situ oil sands operations, the bitumen is extracted by injecting steam into the reservoir, causing it to soften to a point where it can be pumped to the surface. Typically, the steam is produced using boilers called once-through steam generators (OTSG). These boilers use a series of tubes that run along the outside of a heat source.

Get a Quote


2014-5-17 · IN OIL AND GAS OPERATIONS This chapter provides a general overview of the waste streams associated with various oil and gas operations. The overview is presented in an outline format for easy reference. Separate sections are presented for drilling operations, oil and gas production operations, gas plant operations, and pipeline operations

Get a Quote

Steam Generation Systems | Industrial Steam

Foremost is a pioneer in the field of enhanced oil recovery. We offer portable steam generation systems from 7.5 MMBTU/hr to 25 MMBTU/hr capable of producing up to 272 m3 of water into 80% quality of steam at pressures up to 2500 PSI.

Get a Quote

Håvard Devold Oil and gas production handbook An

2018-5-9 · the capacity of the existing oil and gas pipeline network, it results in bottlenecks and low prices at the production site. Soon, oil had replaced most other fuels for motorized transport. The automobile industry developed at the end of the 19th century, and quickly adopted oil as fuel. Gasoline engines were essential for designing successful

Get a Quote

Belridge - Aera Energy

Belridge Producing Complex Located in Kern County, Calif. approximately 45 miles west/northwest of Bakersfield, the Belridge Producing Complex covers an area roughly 22 miles long and 2.5 miles wide. The Belridge Producing Complex includes exploration and production (E&P) operations in the North and South Belridge, Lost Hills, Cymric, and McKittrick oil fields.

Get a Quote

sreejesh nair - Senior Steam engineer - Al Khorayef

About. Experienced Professional in oil and gas including Automation and Instrumentation commissioning and Plant Operation. Experience include commissioning and Operations of EOR Projects,Once through steam generators (OTSG),Waste Heat Recovery Steam Generators (WHRSG),Water treatment plants,Oil production and Testing facilities.

Get a Quote


2015-3-18 · Clayton Steam Generators are backed by a world-wide support team of engineers and technicians to keep you online and in full production. Size, Safety and Performance Are Ideal for Offshore Oil Rigs AT THEIR BEST WHEN THE GOING GETS TOUGH OFFSHORE STEAM GENERATORS • Floating Production Platform • Sub-Sea Operations Vessels • Harsh

Get a Quote

Steam Power Generation and Services | GE Power

2019-10-8 · GE Steam Power puts a century of expertise to work every day, with local teams in more than 70 countries around the world. In growing economies like India, China, Latin America, Southeast Asia, and Africa, this means affordable power, local jobs, and better infrastructure.

Get a Quote

Economics of Steam Generation for Thermal

2019-10-12 · The thermal-enhanced-oil-recovery (EOR) steam-generation projects in Persian Gulf oil fields are on such a large scale that they affect an entire country's economic position. As such, the policies related to oilfield steam generation should be decided at the national level by use of the cost of the marginal fuel.

Get a Quote

Related Boiler Information